To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.243150 and is the answer not in the manual?
Details the warranty terms for product defects and commercial use.
Describes the location and use of the carrying handle for transporting the saw.
Explains the spindle lock button for blade installation, changing, or removal.
Details how to prevent unauthorized use by locking the switch trigger with a padlock.
Mentions positive stops at 0°, 22-1/2°, and 45° for precise angle settings.
Describes the bevel lock knob for securing the saw arm at desired bevel angles.
Notes the electric brake for quick stopping of blade rotation.
Explains the miter fence for holding workpieces securely and its sliding feature.
Describes the protective lower blade guard and its retraction mechanism.
Details the four bolt holes for securely mounting the saw to a workbench.
Specifies the power requirements and electrical connection details for the saw.
Instructions for installing the miter lock handle to secure the saw at desired miter angles.
Instructions for installing the dust guide onto the exhaust port of the upper blade guard.
Step-by-step guide for safely installing a new saw blade onto the spindle.
Procedure to align the miter table perpendicular to the saw's fence using a framing square.
Procedure to align the saw blade parallel to the fence using a framing square.
Procedure to align the saw blade perpendicular to the miter table using a combination square.
Checks the saw arm's ability to rise freely and notes potential pivot joint play.
Assesses the ease of bevel movement and notes tight joints or play.
Explains the depth stop function and its factory setting for cutting capacity.
Details how to adjust the depth stop using wrenches to set blade depth.
Describes how to make a straight crosscut with the miter table at 0°.
Explains how to make a bevel cut with the blade angled to the workpiece.
Defines a compound miter cut and its applications in framing and molding.
Step-by-step instructions for setting angles and performing a compound miter cut.
Instructions on using supports to ensure stability when cutting long workpieces.
Provides a chart for compound angle settings for popular structures.
Details on how to cut crown molding accurately using the miter saw.
Method for accurately cutting crown molding by laying it flat on the miter table.
Guidance on positioning warped material correctly against the fence to avoid blade binding.
Recommendations for clamping wide workpieces using a C-clamp for safety.
Step-by-step instructions for installing the laser guide onto the saw spindle.
Explains how the laser guide works and how to align it for accurate cuts.
Details how to align the laser line with your workpiece mark for precise cutting.
Instructions for replacing the button cell batteries in the laser guide unit.
General advice on cleaning plastic parts and avoiding damaging solvents.
States that bearings are pre-lubricated for the life of the unit.
Guidance on selecting and using appropriate extension cords for the saw.
Detailed steps for checking and replacing the saw's externally accessible carbon brushes.
General