To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.243130 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Motor Power | 15 Amp |
| Blade Diameter | 10 inches |
| Blade Size | 10 inches |
| Table Size | 20 x 26 inches |
Details the terms of the full one-year warranty for the product.
Explains the meaning of safety symbols (Danger, Warning, Caution) used in the manual.
Lists the maximum cutting capacities at various miter and bevel angles.
Details the power supply requirements (120V, 60Hz AC) and warnings.
Step-by-step instructions for installing a new saw blade.
Details procedures for removing and installing the saw blade, including warnings.
Step-by-step guide to ensure the miter table is square to the fence.
Instructions for aligning the saw blade perpendicular to the fence.
Guide to ensure the saw blade is square to the miter table.
Explains how to perform a straight or miter crosscut.
Details the steps for performing a straight crosscut.
Details how to cut crown molding accurately using the saw.
Provides instructions for setting up and performing a compound cut.
Provides a chart for compound angle settings for popular structures.
Explains what a compound miter cut is and its applications.
