Craftsman 315.272350 User Manual

972000-783
10-02
Sold by: Sears Canada Inc. Toronto M5B 2B8
Visit the Craftsman web page: www.sears.com/craftsman
Save this manual for
future reference
• Safety
• Features
• Assembly
• Operation
• Maintenance
• Parts List
254 mm (10 in.) Stationary
TABLE SAW
Model No.
315.272350
Owner's Manual
Customer Help Line: 1-877-369-8665
CAUTION: Read and follow all Safety
Rules and Operating Instructions before first
use of this product.
C US
R

Craftsman 315.272350 Specifications

General

Type	Table Saw
Motor Power	15 Amp
Power Source	120V AC
No-Load Speed	5000 RPM
Bevel Capacity	0-45 degrees
Blade Diameter	10 inches
Table Size	20 inches x 26 inches
Arbor Size	5/8 inches
Dust Port Size	2-1/2 inches

Summary

Warranty

Full Two Year Warranty

Specifies the duration and terms of the product's warranty coverage.

Introduction

Rules for Safe Operation

Electrical

Grounding Instructions

Explains the importance and procedure for grounding the tool.

Product Specifications

Tools Needed

Features

Assembly

Installing the Rear Rail

Provides steps for attaching the rear rail assembly to the saw.

Mounting the Motor

Details the procedure for installing the saw's motor.

Adjustments

Replacing the Blade

Instructs on the safe removal and installation of the saw blade.

Setting the Bevel Stops and Indicator

Guides on calibrating blade angle indicators for accuracy.

Operation

Basic Operation

Covers fundamental principles and procedures for using the table saw.

Causes of Kickback

Identifies factors that can lead to dangerous kickback incidents.

Making a Cross Cut

Provides instructions for performing cross cuts on workpieces.

Maintenance

General Maintenance

Covers cleaning, lubrication, and general upkeep procedures.

Troubleshooting

Parts List for Figure A

How to Order Repair Parts