Page 24 of 101
CORRECT CHANGE PARMS OPTIONS
Correct Change Parms
(Parameters)
Touch the Correct Change Parms
Menu Bar to access to the following
Sub Menus that allow the operator
to set the payback parameters in
the Machine.
• Force Vend
• Declining Balance
• Accept on Low Change
• Low Change Message
• Credit for Failed Vend
• Allow Customer Overpay
CORRECT CHANGE PARMS OPTIONS
Force Vend
Touch the Force Vend Menu Bar to Toggle Between Off and On.
When Force Vend is set to Off:
• All money inserted can be paid back by pressing Cancel to end
the transaction.
When Force Vend is set to On, a consumer will not be able to receive
their credit back when any of the following conditions are met:
• The established credit meets or exceeds the minimum price of
the Selections in the Machine.
• Any bills are stacked in establishing credit.
• Any non-tube coins are inserted in establishing credit .
• A “No Change Without Purchase” message will be displayed
when a consumer attempts to return credit.
Declining Balance
Touch Declining Balance Menu Bar to toggle between Off and On.
• If Declining Balance is set to Off, at the end of a vend, any
change due back to the customer will be paid back
immediately.
• If Declining Balance is set to On the change due back after a
vend will remain on the Display allowing the customer to add
more money to make an additional purchase. Note: If set to On,
customer may touch Cancel to return remaining credit.
To Next Page
Loading...
