Page 25 of 101
Accept On Low Change
• Used to set acceptance of a bill depending on how much
change is available in the Coin Mechanism.
– If set to default $0.00, the Machine will only accept a
bill when the Coin Mechanism has enough change to
pay back full credit.
– If a value is set to anything other than $0.00, bills will
be accepted to the set value even though change may
not be available (the customer may get short changed).
• Touch Accept On Low Change Menu Bar to bring up a Screen
that allows you to set a value.
• Enter the value of money you wish to accept when no change is
available. Setting this to anything other than $0.00 may cause
the customer to get short changed. Touch Accept to Save.
Low Change Message
• Used to set the lowest amount registered in the Coin
Mechanism before the Display shows “USE EXACT
CHANGE”
• Touch Low Change Message to enter lowest value on
corresponding line (default setting of $1.00
recommended).
• Touch Accept to Save the setting.
• Touch Back to exit this Menu Mode.
• Touch Low Change Message Menu Bar to access a Screen
that allows you to change the Value.
• Enter the lowest value of change available before the
Display shows the Low Change Message (setting of $1.00
recommended).
• Touch Accept to Save.
To Next Page
Loading...
