Page 26 of 101
Credit For Failed Vend
Touch Credit For Failed Vend Menu Bar to change between the two
settings:
Return Change = In the event of a failed vend, the credit will be
returned automatically.
Hold Credit = In the event of a failed vend, the credit will remain on the
Machine allowing you to purchase another Item or pressing Cancel to
return the Credit shown.
• Touch Credit For Failed Vend Menu Bar to advance to the
next Screen.
• Touch Return Change or Hold Credit Menu Bar to select the
option for handling the remaining credit after a failed vend.
• Touch Accept to Save.
Allow Consumer Overpay
• Touch the Allow Customer Overpay Menu Bar to toggle
between Off and On.
• When Consumer Overpay set to Off, the Machine will not
accept any currency for which it cannot make change,
regardless of Low Change Message Setting or Accept on Low
Change Setting.
• When Consumer Overpay set to On, based on other settings in
the Machine the customer would be allowed to make a
purchase even if change is not available. This could result in a
potential situation where the consumer gets short-changed.
To Next Page
Loading...
