EasyManua.ls Logo

Crane EE-5956 - Technical Specifications; General Specifications; Pre-Operation Checks

Crane EE-5956
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
TECHNICAL SPECIFICATIONS
Rating Voltage
120V
Wattage
25W
Frequency
60Hz
Water Tank Capacity
Approx. 1 Gallon
Run Time Per Tank
Up to 24 hours
Humidifying Capacity
Up to 275 sq. ft. / 25m2
Noise Level
< 38 decibels from 5 ft away
BEFORE EACH USE:
CHECK HUMIDIFIER PLACEMENT:
Place the Humidifier on an elevated, non-metallic, lint-free, waterproof, level
surface at least 2 feet above the floor.
• DO NOT PLACE ON CARPET OR TOWEL. The
fan vent is located on the bottom of the humidifier
base. The fan vent MUST NOT be obstructed.
• DO NOT PLACE ON WOOD SURFACE or
near furniture that can be damaged by too much
moisture.
CHECK WATER LEVEL SENSOR:
Make sure the Water Level Sensor is secured properly and not obstructed.
(Page 4 – Fig. 1)
CAUTION
• DO NOT attempt to operate the humidifier without water in the Water Tank.
• DO NOT plug or unplug the Power Cord with wet hands as electric shock
could occur.