General Specifications A-3
Connectivity
Sound Blaster Live! card
Audio Inputs
❑ One line-level analog Line input via stereo jack on rear bracket
❑ One mono Microphone analog input via stereo jack on rear bracket
❑ CD_IN line-level analog input via 4-pin Molex connector on card
❑ AUX_IN line-level analog input via 4-pin Molex connector on card
❑ TAD line-level analog input via 4-pin Molex connector on card
❑ CD_SPDIF digital input via 2-pin Molex connector on card, accepting sampling rates of 32,
44.1 and 48 kHz
Audio Outputs
❑ DIGITAL OUT (Front and Rear SPDIF digital outputs) via 4-pole 3.5mm minijack on rear
bracket
❑ Two line-level analog outputs via stereo jacks on rear bracket, Front and Rear Line-Outs
❑ Stereo headphone (32-ohm load) support on Front Line-Out
Interfaces
❑ D-Sub MIDI interface for connection to external MIDI devices. Doubles as Joystick port
❑ AUD_EXT 2x20 pin header for connection to Optical Digital I/O card or Drive Bay
To Next Page
