Troubleshooting D-7
3. In the System Properties dialog box, click the Device Manager tab.
4. Under the Sound, Video And Game Controllers entry, select the conflicting audio card
driver—indicated by an exclamation mark (!)—and click the Properties button.
5. In the Properties dialog box, click the Resources tab.
6. Make sure that the Use automatic settings check box is selected, and click the OK button.
7. Restart your system to allow Windows 95/98 to reassign resources to your audio card and/
or the conflicting device.
Problems in
Windows NT 4.0
A Service Control Manager error message appears with one or more other error messages
at system restart.
This occurs after you remove an audio card from your computer after you have successfully
installed the Sound Blaster Live! card. Windows is trying to match the drivers to the removed
audio card.
To solve this problem:
1. Log on to your computer as Administrator.
2. Click Start -> Settings -> Control Panel.
3. Double-click the Multimedia icon, and then click the Devices tab.
4. In the list, remove from under these entries
• Audio Devices
• MIDI Devices And Instruments
the items other than
• Audio for Creative SB Live!
• MIDI for Creative SB Live!
• MIDI for Creative S/W Synth
5. Click the OK button to close the dialog box.
The drivers are removed.
To Next Page
Loading...
