EasyManua.ls Logo

Creative Sound Blaster E3 SB1610 - Support, Safety, and Compliance

Creative Sound Blaster E3 SB1610
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Specifications
High Definition Audio Quality (for Windows)
l 24-bit Digital-to-Analog conversion of digital sources during playback in 24-bit with sampling rate of
up to 96 kHz.
l 24-bit Analog-to-Digital conversion of analog sources during recording in 24-bit with sampling rates
up to 48 kHz.
Inputs
l One 3.5 mm (1/8") jack for mono analog microphone input
l One 3.5 mm (1/8") jack for stereo line-level analog input
l One Micro-USB port
l Built-in mono microphone
Outputs
l Two 3.5 mm (1/8") jack for stereo analog headphones
l Up to 600 ohm headphone amplifier
Controls and Indicators
l Multifunction button
l Volume control
l Rewind/Previous Track button
l Forward/Next Track button
l Power / Bluetooth button
l White/Red LED for power/battery indication
Physical Specifications
l Dimensions (L x W x H) : 60.5 X 45 X 23 mm
l Weight: Approx. 0.044 kg
Technical Specifications
l Operating Temperature range: 0°C to 40°C (32°F to 104°F)
l Lithium Polymer Battery: 3.7 V 850 mAh (3.15 Wh)
l USB Input: 5V 500mA
l Bluetooth Version: Bluetooth 2.1 + EDR (Enhanced Data Rate)
l Supported Bluetooth Profiles:
o
A2DP (Wireless Stereo Bluetooth)
o
AVRCP (Bluetooth Remote Control)
o
HFP (Hands-Free Profile)
l Bluetooth Operating Frequency: 2402 - 2480 MHz
l Bluetooth Operating Range: Up to 10 meters / 33 feet
(Measured in open space. Walls and structures may affect range of device.)
l Supported Audio Codec: AAC, SBC, aptX
®
Sound Blaster E3 General Specifications 34

Table of Contents

Related product manuals