3-4 Using WebCam Go Plus as a Digital Camera
Customizing
camera settings
Use WebCam Go Control to adjust the following camera settings for photo-taking:
❑ Image size
❑ Number of frames in multiple snapshots
❑ Time interval between successive frames for multiple snapshots
❑ Level of quality
❑ Beep mode enabled or disabled
❑ Duration of the delay for taking delayed (self timer) snapshots
❑ Power-saving enabled or disabled
❑ Length of time before the camera is switched off
You can set different settings of image size and quality for each of the four camera modes.
For more information on
downloading pictures and
customizing the camera, refer to
the Help file in WebCam Go
Control.
To Next Page
Loading...
