Crem EX2 - Storage and Disposal; Long-Term Storage Requirements; Machine Disposal Requirements; Caution

10
Original instructions.
STORAGE AND DISPOSAL
· Long-term storage requirements
Before storage for a month or more be sure to:
• Perform all weekly and periodic cleaning procedures described in this manual.
• Disconnect and roll up the power cord (this must be performed by a qualied person).
• Disconnect the machine’s water inlet hose from the domestic water supply and drain the boilers
(this must be performed by a qualied person).
• Clean the drip tray and exterior of the machine to remove any coee or other residue.
• Cover / re-pack the machine in its original carton and store it in a dry place where it will not
be exposed to extreme temperatures or humidity.
• When returning the machine to service after long-term storage, perform all weekly and
periodic cleaning procedures and reconnect the water and power supplies (this must be
performed by a qualied person) before use.
· Machine disposal requirements
If the machine ever needs to be scrapped and disposed of be sure to:
• Disconnect and roll up the power cord (this must be performed by a
qualied person).
• Disconnect the machine’s water inlet hose from the domestic water
supply and drain the boilers (this must be performed by a qualied
person).
• Pack up and ship/deliver the machine to a certied recycling centre.
· Caution
• Risk of re and electric shock.
• Replace only with manufacturer’s original cord set.
• Disconnect from power supply before servicing.
Plug Region Part No. Description
Type F 16A EU/KO 45400005 Power_Cord_1PhN_16A_Type_F
Type G 13A UK 45400002 Power_Cord_1PhN_13A_Type_G
Type I 10A Aus 45400006 Power_Cord_1PhN_10A_Type_I
Type I 15A Aus 45400007 Power_Cord_1PhN_15A_Type_I
Nema 6-20P US/CAN 10037555 Power_Cord_UL_C19_Nema6-20P
List of original detachable power cord by plug type: