EasyManua.ls Logo

Crem EX2 - Daily Flushing - Control Version; Daily Flushing - Display Version

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
K5 + K1
Original instructions.
CLEANING AND CARE
· Daily ushing - Display version
WARNING!
Do not open the group or remove
the portalter until the cleaning has
nished! This will release steam and
hot water which could result in burns.
Pro Tip:
Run the ushing cycle for each group at
the end of each day to prevent coee
residue drying and building up inside
the brewing groups.
1. Remove the lter basket and place the blind lter in the portalter.
2. To activate the cleaning program:
a.) While the machine is on, press and hold down the K5 on the control
panel of the group requiring cleaning and then push K1 at the same
time. Auto-cleaning cycle will start automatically and diplay show [cLE]
b.) Release the buttons. The machine will clean, ush, and rinse itself.
3. After rinsing, remove the blind lter and store it in a safe place for the
next usage. Reinstall the lter basket in the portalter.
4. Clean the internal side of the portalter before replacing the espresso
lter. If needed, let the portalter soak into warm water or use cleaning
detergent for espresso machines.
· Daily ushing - Control version
WARNING!
Do not open the group or remove
the portalter until the cleaning has
nished! This will release steam and
hot water which could result in burns.
Pro Tip:
Run the ushing cycle for each group at
the end of each day to prevent coee
residue drying and building up inside
the brewing groups.
1. Remove the lter basket and place the blind lter in the portalter.
2. To activate the cleaning program:
a.) Turn o the machine at the main switch.
b.) Press and hold down the K3 on the control panel of the group
requiring cleaning. Without releasing the button, turn on the machine.
Auto-cleaning cycle will start automatically.
c.) Release the button. The machine will ush and rinse itself.
3. After rinsing, remove the blind lter and store it in a safe place for the
next usage. Reinstall the lter basket in the portalter.
4. Clean the internal side of the portalter before replacing the espresso
lter. If needed, let the portalter soak into warm water or use cleaning
detergent for espresso machines.

Related product manuals