8
Special packing materials are used to protect the equipment during transportation.
Excessive vibration or shock can cause malfunction.
2.5 Maintenance and check
Do not wipe any part of the instrument with a solvent or a strong cleaning solution.
Otherwise the instrument may be damaged.
Do not use organic solvents such as paint thinner to clean the outside of the device.
Otherwise the surface of the equipment may be damaged.
Avoid touching the optical components of the instrument to prevent performance
degradation caused by fingerprints or grease stains on the lens set.
Any repairs and services to this instrument must be carried out by personnel or dealers
Adjustments must be made by the technical service personnel of MSOC or other authorized
The battery of the instrument must be replaced by the technical service personnel of MSOC
or other authorized personnel.
When the equipment is returned to the company for repair or maintenance, use a clean
cloth dipped in the alcohol disinfection device (especially the area of patient contact).
When there is a big difference between the results of the Auto ref/keratometer
measurements and the subjective measurements, please contact MSOC or the dealer to
determine whether the current equipment requires calibration of the measurement
accuracy.
2.6 Disposal
Follow local governing ordinances and recycling plans regarding disposal or recycling of
device components.
It is recommended to deal with industrial waste by the designated contractor.
Deal with packaging material in accordance with local laws and regulations.
To Next Page
Loading...