Crestron 1 Beyond AutoTracker 3 Series - Page 34

Product Manual — Doc.
9323C
IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-SLVR-
1B • 34
UN/PWTab
Select the UN/PW tab to modify the camera name, authentication credentials, and other administrative
settings.
UN/PW Tab
The following settings can be modified:
l
Password settings
o
Old password:If applicable, enter the existing admin password set for the camera.
o
New password:Enter a new admin password for the camera.
o
Confirm:Enter the admin password specified in the New password field.
o
Select Save to change the password.
CAUTION:Do not lose the admin password, as it cannot be reset if it is forgotten.
l
Reboot
o
Select Reboot to restart the camera.
o
Select Reset to restore the camera to its factory default settings.
CAUTION:Resetting a camera associated with an Automate™ VXcamera switcher
system will clear all camera presets.
l
Camera Name:Enter a new camera name for identification and management purposes. By
default, the camera name includes the device's serial number.
l
Local Time:View the local time on the host computer. Select OKto refresh the time.
l
NTPSettings