Product Manual — Doc. 9020C AirMedia® Series 3 Receivers • 18
Select the + (plus) icon next to Adapter 1 to view the following DHCP server settings:
l
DHCP: Reports whether the IP address is dynamic (Yes) or static (No)
l
IP Address: The receiver IP address
l
Subnet Mask: The receiver subnet mask
l
Default Gateway: The gateway router address
l
Link Active: Reports the status of the Ethernet connection. A true message indicates that
the Ethernet connection is active, while a false message indicates that the Ethernet
connection is inactive.
l
MAC Address: The unique device MAC (media access control) address
Select the + (plus) icon next to Wireless Access Point to view the following wireless access point
settings:
NOTE: Values are shown for the following settings only if a wireless access point is used.
l
DHCP Enabled: Reports whether the IP address is dynamic (Yes) or static (No)
l
SSID: The wireless access point network name
l
IP Address: The wireless access point IP address
l
Subnet Mask: The wireless access point subnet mask
l
Default Gateway: The gateway router address
l
Link Active: Reports the status of the Ethernet connection. A true message indicates that
the Ethernet connection is active, while a false message indicates that the Ethernet
connection is inactive.
To Next Page
Loading...
