65 • AirMedia® Series 3 Receivers Product Manual — Doc. 9020C
l
Name: The chosen username
l
Active Directory User: Turn on the toggle to use authentication via Active Directory for the
selected user.
l
Password: Enter a new password for the selected user.
l
Confirm Password: Reenter the password provided in the Password field.
l
Groups: Add the user to one or more groups. For more information, refer to Groups
(below).
NOTE: A user must be added to an Active Directory group to be selected as an Active
Directory user.
Select OK to save any changes and to return to the Authentication Management > Users page.
Select Cancel to cancel any changes.
Groups
Select Groups to view and edit settings for receiver groups. Receiver groups are used to group
users by access level and Active Directory authentication settings.
Authentication Management - Groups
Enter text into the Search... field to find and display groups that match the search term(s).
Groups are listed in table format. The following information is displayed for each group:
l
Group Name: The chosen username
l
AD Group: Reports whether the group is (Yes) or is not (No) authenticated through Active
Directory
l
Access Level: The access level granted to the user (Administrator, Connect, Operator,
Programmer, or User)
To Next Page
Loading...
