91 • AirMedia® Series 3 Receivers Product Manual — Doc. 9020C
From a Mac
Once the client application is downloaded, content can be shared.
To share content from a Mac:
1. Run the client application. The Connect screen appears and lists any discovered AirMedia
devices.
Enter Code Dialog Box
2. Select Connect to the right of the desired receiver or enter the device's IP address in the
search bar and press enter. The Enter Code screen appears.
NOTE: Select the star button to the left of the desired receiver to add or remove the
receiver from the favorite devices list. Select the favorite devices list button to access
the list.
To Next Page
Loading...
