Product Manual — Doc. 9020C AirMedia® Series 3 Receivers • 34
Date/Time
Select Date/Time to configure the settings for the receiver's internal clock.
System Setup – Configure Date/Time
l
Synchronization: The receiver’s internal clock can be synchronized with a time server.
o
Time Synchronization: Turn on the toggle to use time synchronization via SNTP
(Simple Network Time Protocol).
o
Synchronize Now: With Time Synchronization turned on, select Synchronize Now to
synchronize the receiver with the SNTP server(s) entered in the NTP Time Servers
table.
To Next Page
Loading...
