Crestron CEN-IO Series User Manual (English)

To Next Page

The Crestron® CEN-IO-COM-202, CEN-IO-DIGIN-204, CEN-IO-IR-204,

and CEN-IO-RY-204 are wireless I/O extenders designed to expand the

available control ports within a commercial or residential system. The

extenders communicate to the local network over Wi-Fi® wireless

communications for remote control and monitoring.

NOTE:The CEN-IO-COM-202, CEN-IO-DIGIN-204, CEN-IO-IR-204,

and CEN-IO-RY-204 are functionally similar. For simplicity within this

guide, the term "extender"is used to refer to all models except where

otherwise noted.

In the Box

1 CEN-IO-COM-202, CEN-IO-DIGIN-204, CEN-IO-IR-204, or

CEN-IO-RY-204, Wi-Fi Network Extender

Additional Items

1 Bracket, Mounting, Integrated DINRail Clip (4510935)

1 Connector, 2-Pin (2003574)

1 Power Pack, PW-0512WUL (2045867)

2 Screw, 6-32, 3/8 in., Phillips(2007225)

CEN-IO-COM-202 Only

2 Connector, 5-Pin (2003577)

CEN-IO-DIGIN-204 Only

1 Connector, 5-Pin (2003577)

CEN-IO-IR-204 and CEN-IO-RY-204 Only

1 Connector, 8-Pin (2003850)

Mount the Device

The extender can be mounted onto a flat surface or a standard DIN rail

using the included mounting bracket.

CAUTION:To prevent overheating, do not operate the extender in an

area that exceeds the environmental temperature range (41 to 104°F

or 5 to 40°C) for this device.

Optional rack mount and pole mount kits (not included)are also available

for use with the extender. For more information, refer to the RMK-IFE-1U

Installation Guide (Doc. 7627) and the PLMK-IFE-101 Installation Guide

(Doc. 7615) at www.crestron.com/manuals.

Determine a Mounting Location

Mount the extender in a location that will provide optimum performance.

For more information, refer to the Best Practices for Installation and

Setup of Crestron RF Products Reference Guide (Doc. 6689) at

www.crestron.com/manuals.

CEN-IOSeries

QuickStart

Wi-Fi® Network I/O Extenders

Other manuals for Crestron CEN-IO Series

Quick Start Guide2 pages

Need help?

Do you have a question about the Crestron CEN-IO Series and is the answer not in the manual?

Crestron CEN-IO Series Specifications

General

Series	CEN-IO
Input/Output Ports	Varies by model
Inputs	Varies by model
Outputs	Varies by model
Control Protocols	Cresnet, Ethernet
Mounting	Varies by model
Form Factor	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% non-condensing
Dimensions	Varies by model
Weight	Varies by model
Power Requirements	24VDC, Varies by model (e.g., 0.5A, 1A)