Need help?Do you have a question about the Crestron CEN-IO and is the answer not in the manual?
General| Brand | Crestron |
|---|---|
| Model | CEN-IO |
| Category | Network Hardware |
| Language | English |
Explains the CEN-IO as an Ethernet interface for VersiPort input/outputs and relay closure outputs.
Details the various ports on the rear and front panels of the CEN-IO unit.
Describes the 21 LED indicators on the front panel of the CEN-IO.
Instructions on how to prepare the CEN-IO for use, including hookup and connections.
Details network configuration options accessible via the MAIN MENU.
Explains how to configure TCP/IP settings like IP Address, IP Mask, and MTU.
Describes SNMP configuration options like trap catchers and community strings.
Details how to set read and write community strings for SNMP access.
Explains how to set contact, assigned name, and location information for SNMP.
Describes how to add, remove, or display static masters in the system.
Explains how to perform a PING test to check network connectivity and configuration.
Shows how to view the current status of all eight relays.
Details the procedure to open a specific relay.
Details the procedure to close a specific relay.
Displays the current digital state of all eight VersiPorts.
Displays the current analog value of all eight VersiPorts.
Allows review and modification of VersiPort access settings.
Explains a sample SIMPL program structure and its components.
Guides users on creating SIMPL Windows programs for the CEN-IO.
Details using the Configuration Manager in SIMPL Windows to set up devices.
Explains using the Programming Manager to assign signals and symbols.
Provides a table of common issues and their corrective actions.
Outlines the procedures for returning products for repair or service.
Details the terms and conditions of the CRESTRON product warranty.
Defines the information available via SNMP protocol for the CEN-IO.
To Next Page
