Why does the video flicker or drop when the DM NVX device is touched on my Crestron Switch?
If the video flickers or drops when the DM NVX device is touched or when metal in the vicinity of the device is touched, properly ground the DM NVX device.
What does it mean if a message indicating that the resolution is unsupported appears on the display connected to my Crestron Switch (when DM NVX device functions as a transmitter)?
If a message appears indicating that the resolution is unsupported, select the correct EDID or change the resolution of the input.
What does it mean if a message indicating that the resolution is unsupported appears on the display connected to my Crestron Switch (when DM NVX device functions as a receiver)?
If a message appears indicating that the resolution is unsupported when the DM NVX device functions as a receiver, change the scaler resolution setting to a resolution that the display can support.
General| Category | Media Converter |
|---|---|
| Model | DM-NVX-363 |
| Humidity | 10% to 90% non-condensing |
| Resolution | Up to 4K @ 60Hz (4:4:4) |
| Ethernet | 10/100/1000 Mbps |
| Video Input | 1 x HDMI |
| Video Output | HDMI |
| Audio Input | HDMI, Analog |
| Audio Output | HDMI, Analog |
| PoE | Yes |
| Power | PoE or 12V DC |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
To Next Page
