28 • DM NVX System Design Guide – DOC. 7977F
Crestron Service Provider Handoff
Consult the Crestron Service Providers (CSPs) once the DM NVX network and endpoints
are installed and interconnected. Typical activities of a CSP in a DM NVX installation
may include the following:
• Writing appropriate control programs for controllers on the network
• Programming appropriate serial and IR control for endpoint devices
• Configuring external analog and digital audio source input and output
• Configuring video walls
• Designing button and UI features for control surfaces such as touch screens
and switches
• Managing EDID for endpoint devices
As CSPs implement and deploy the program, installers and designers should test and
review the functionality. The programmer must document the program functionality to
avoid future issues.
To Next Page
Loading...
