HDCP State - Reports the status of HDCP authentication. Possible values are as
follows:
• HDCP not required
• Unauthenticated
• Busy (authentication in progress)
• Authenticated
• Non-HDCP source
Interlaced – Indicates whether the scanning method used is interlaced or
progressive scanning method.
Horizontal Resolution - Reports the horizontal resolution of the HDMI Output.
Reported values range from 0 to 4096 pixels.
Vertical Resolution - Reports the vertical resolution of the HDMI Output in lines.
Reported values range from 0d to 2160 lines.
Frames per Second - Reports the frame rate of the HDMI Output.
Reported values range from 0 (no refresh rate information is available) to 85 Hz.
Aspect Ratio - Reports the aspect ratio of the HDMI output.
Audio Format - Reports the audio format.
Audio Channels - Reports the number of detected audio channels accompanying
the video.
Click –Less Details to hide this section from view.
21 • DM-NVX-E30(C)
To Next Page
Loading...
