If groups listed in the Groups table span across multiple pages, navigate through the
groups by clicking a page number or by using the left or right arrows at the bottom of the
Groups pane to move forward or backward through the pages.
Additionally, each page can be set to display 5, 10, or 20 groups by using the drop-down
menu to the right of the navigation arrows.
Existing groups are displayed in table format and the following information is provided for
each group:
• Group Name: Displays the name of the group
• AD Group: Displays whether the group requires authentication using Active
Directory
• Access Level: Displays the pre-defined access level assigned to the group
(Administrator, Programmer, Operator, User, or Connect)
Click the corresponding button in the Actions column to view detailed group information
or to delete selected group .
To create new group, click on the Create Group button in the Groups tab.
Create local group
1. Click Create Group button
2. In Create Group dialog enter the following:
• Enter group name in the Name text field
• Assign group access level by selecting a pre-defined access level
(Administrator, Connect, Operator, Programmer, User) from the Access Level
drop-down list
• Make sure that the Active Directory Group slider is set to Off
3. Click OK to save; click Cancel to cancel the changes.
Add Active Directory group
A group cannot be created or removed from Active Directory server but an access can be
granted to an existing group in Active Directory.
39 • DM-NVX-E30(C)
To Next Page
Loading...
