Introduction
The DM-NVX-E30(C) is a compact video encoder designed to function as a transmitter
featuring support for HDR10 and HDCP 2.2.
Web-based Configuration Interface
The web-based configuration interface of the DM-NVX-E30(C) consists of web pages that
allow viewing status information of the DM-NVX-E30(C) and configuration of its network,
and device settings.
Accessing the Web-based Configuration interface of DM-NVX-E30(C)
The web-based configuration interface is accessed from a web browser. The following
table lists various operating systems and the corresponding supported web browsers.
Operating System and Supported Web Browsers
OPERATING SYSTEM SUPPORTED WEB BROWSERS
Windows® operating system
Chrome™ web browser, version 31 and later
Firefox® web browser, version 31 and later
Internet Explorer web browser, version 11 and later
Microsoft Edge web browser
OS X® operating system
Safari® web browser, version 6 and later
Chrome™ web browser, version 31 and later
Firefox® web browser, version 31 and later
To access the user interface, do either of the following:
• Open it directly in a web browser
• Open a web browser from within the Crestron Toolbox™ application.
Opening directly in Web Browser
1. Press the Setup button on the DM-NVX-E30(C) to display the IP address on the HDMI
output or use the front panel of the DMF-CI-8 chassis for DM-NVX-E30C
2. Open a compatible web browser.
3. Enter the IP address of the DM-NVX-E30(C)
4. Enter your credentials in the Device Administration dialog (Note that the user
name and password are case sensitive). The default user name is admin, and the
default password is admin.
NOTE: For enhanced security, it is recommended that the default password is
changed.
4 • DM-NVX-E30(C)
To Next Page
Loading...
