Crestron DM-TX-201-C Supplemental Guide

Contents
Introduction 1
Physical Description 2
Top View 2
Front View 2
Rear View 3
Communications Using Crestron Toolbox Software 5
Communications via a DM Switcher 5
Using USB Communications 5
Using TCP/IP Communications 6
Communications via the LAN Port of the DM-TX-201-C 6
IP Table Configuration 7
Configuration Using DMTool 8
Firmware Upgrade 9
Troubleshooting 10
Appendix: Pin Assignments 11
Supplemental Guide — Doc. 6958E Contents • i

Crestron DM-TX-201-C Specifications

General

Type	Network transmitter
Duplex system	Full, Half
Auto-negotiation	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3at
RJ-45 ports quantity (transmitter)	2
Product color	Black
Output current	0.75 A
Output voltage	24 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	32 mm
Width	187 mm
Height	165 mm
Weight	721 g