Crestron DMPS3-4K-350-C Series User Manual

Determine the Address of the
Device
The device can be addressed using the hostname or the IP address.
Thedefault hostname is DMPS3- xxxxxxxx , where xxxxxxxx consists of
the last eight characters (excluding punctuation) of the MAC address.
Forexample, if the MAC address is 00:10:7F:08:09:AA:05, the default
hostname is DMPS3-0809AA05. The MAC address is labeled on the
shipping box and rear panel of the device.
The IP address is assigned using DHCP (Dynamic Host Configuration
Protocol), which is enabled by default. To set a static IP address, use
either of the following:
l
Crestron Toolbox™ software on a PC that connects to the device via
the Ethernet network or a USB connection to the COMPUTER port
on the front panel
NOTE: The Device Discovery Tool can be used to find the current
IP address.
l
The front panel LCD display menu
Configure the Device
Using the web interface, configure the device. To access the web
interface, open a web browser and enter either of the following:
https:// hostname /setup ( hostname is the hostname of the device)
or
https:// xxx.xxx.xxx.xxx /setup ( xxx.xxx.xxx.xxx is the IP address of the
device)
The device also provides the built-in .AV Framework™ program, which
enables complete system control without requiring additional
programming. To access the .AV Framework configuration interface,
open a web browser and then enter either of the following:
https:// hostname /AVF/index.html ( hostname is the hostname of
the device)
or
https:// xxx.xxx.xxx.xxx /AVF/index.html ( xxx.xxx.xxx.xxx is the IP
address of the device)
For more information, go to www.crestron.com/avframework.
5
DMPS3-4K-350-C and DMPS3-4K-250-C Series
QuickStart
3-Series® DigitalMedia™ Presentation Systems

Crestron DMPS3-4K-350-C Series Specifications

General

Brand	Crestron
Model	DMPS3-4K-350-C Series
Category	Conference System
Language	English