Crestron HDI-XSPA - Page 12

2. Press up or down on the Nav Pad to highlight
Balance
, and then press the center
button of the Nav Pad. The
Balance
screen is displayed.
Balance Screen
3. Press right or left on the Nav Pad to adjust the balance, and then press the center
button of the Nav Pad. The display returns to the previous menu.
To cancel and return to the previous menu, press
BACK
.
Stereo or Mono (Downmix Output Only)
The output of the downmix output can be set for stereo or mono sound. Perform the
following to set the output for stereo or mono sound:
1. Select the output to be configured as described in “Configure the Outputs” on page
7.
2. Press up or down on the Nav Pad to highlight
Stereo
or
Mono
, and then press the
center button of the Nav Pad. The setting toggles between
Stereo
and
Mono
.
Minimum Volume (Theater and Downmix Output)
The minimum volume setting is the lowest volume setting to which an output can be set.
Perform the following to adjust the minimum volume:
1. Select the output to be configured as described in “Configure the Outputs” on page
7.
2. Press up or down on the Nav Pad to highlight
Min Volume
, and then press the
center button of the Nav Pad. The
Minimum Volume
screen is displayed.
Minimum Volume Screen
3. Press up or down on the Nav Pad to adjust the minimum volume level, and then
press the center button of the Nav Pad. The display returns to the previous menu.
To cancel and return to the previous menu, press
BACK
.
Balance
L
R
0
Minimum
Volume
0%
8 • HD(I)-XSPA: 4K UHD Surround Sound AV Receiver Supplemental Guide – DOC. 7448E