Crestron HDI-XSPA - Display

2. Press up or down on the Nav Pad to highlight
Treble
, and then press the center
button of the Nav Pad. The
Treble
screen is displayed.
Treble Screen
3. Press left or right on the Nav Pad to adjust the treble level, and then press the
center button of the Nav Pad. The display returns to the previous menu.
To cancel and return to the previous menu, press
BACK
.
Loudness
The loudness feature can be set from the
Downmix
menu. Perform the following to set
loudness:
1. Open the
Downmix
menu as described in “Downmix” on page 20.
2. Press up or down on the Nav Pad to highlight
Loudness: On
or
Loudness: Off
,
and then press the center button of the Nav Pad. The setting toggles between
On
and
Off
.
Display
The display can be turned on or off during operation. To switch the display on or off during
operation, press up or down on the Nav Pad to highlight
Display Off
, and then press the
center button of the Nav Pad. The display goes dark.
To turn the display on again, press the center button of the Nav Pad.
Treble
-12dB +12dB
0.0dB
22 • HD(I)-XSPA: 4K UHD Surround Sound AV Receiver Supplemental Guide – DOC. 7448E