Crestron TSS-770 - Quick Start Manual

The Crestron® TSS-770 and TSS-1070 are wall mount touch screens
designed specifically for room scheduling applications. The touch screens
install near the entrance of a meeting room or huddle space to provide a
clear indication of the room availability and schedule, and they integrate
seamlessly with a variety of popular scheduling services.
NOTE:TheTSS-770andTSS-1070arefunctionallysimilar.For
simplicity within this guide, the term "touch screen"isused except
where otherwise noted. The TSS-770-T-LB and TSS-1070-T-LBkits
provide a version of the touch screen designed to run the Microsoft
Teams® Panels scheduling application exclusively.
In the Box
1 TSS-770 or TSS-1070*, Room Scheduling Touch Screens
Additional Items
1 Bracket, Mounting (2055453)
4 Screw, 6-32 x 3/4 in., Undercut Head, Phillips (2033247)
4 Screw, M3 x 16 mm, Flat Head,Phillips(2013788)
2 Screw, M3.5 x 25 mm, Flat Head,Phillips(2023756)
4 Anchor, #6-8, Self-Drilling (2035879)
4 Screw, 6-AB x 1 in., Flat Head, Phillips (2056874)
1 Bracket, Security (2055451)
2 Screw, M2 x 4 mm, Security (2055454)
1 Key, Security BracketRelease(2055452)
*Referto the TSS-770-B-S and TSS-1070-B-S product pages at www.crestron.com for a
complete list of color variations.
Install the Mounting Bracket
The TSS-770 and TSS-1070 install over a standard 2-gang or 3-gang
U.S. electrical box, a 2-gang European electrical box, or a 2-gang U.K.
electrical box. The touch screen also installs into drywall.
NOTES:
l
Additional mounting options are possible using the following
mounting accessories. For more information, refer to the product
pages at www.crestron.com.
o
TSW-UMB-70 universal mounting bracket
o
TSW-UMB-70-PMK preconstruction mounting kit
o
TSW-UMB-70-BBI wall mount back box
o
TSW-770/1070-MSMK series multisurface mounting kits
o
TSW-770/1070-MUMK mullion mounting kit
o
TSW-770/1070-RMB series retrofit mounting brackets
o
TSW-770/1070-RMK series rack mount kits
l
Installing the mounting bracket to an electrical box is required only
if one of the mounting solutions above is not used. Refer to the
documentation for your chosen mounting solution at
www.crestron.com/manuals.
Electrical Box Mounting
To mount the touch screen into an electrical box, use the appropriate
screws (four 6-32x3/4in. screws, four M3x16mmscrews, or two
M3.5x25 mm screws) to attach the mounting bracket to the electrical
box as shown in the following illustrations:
NOTE:ForU.S. installations, use a #2 Phillips screwdriver. For
European or U.K. installations, use a #1 Phillips screwdriver.
TSS-770 and TSS-1070
QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens
1