Mount on a Wall
The soundbar includes anchors that are suitable for mounting it on sheetrock walls up to 1/2 in. (13 mm) thickness. Masonry and other materials may
require additional installer-supplied mounting hardware.
NOTES:
l For optimal viewing results, the soundbar should be mounted in a location that places the camera approximately 12 in. (305 mm) above the plane of
the room’s conference table.
l When mounting on a wall beneath a display device, leave 3/4 in. (19 mm) (minimum) clearance above the top of the soundbar. Use the included
template to allow for sufficient clearance between the soundbar and display device.
The following tools are required to mount the soundbar:
l Drywall saw (not included)
l Drill with 5/16 in. bit (not included)
A template is included to provide drill hole locations for the included mounting hardware.
1. Attach the template to the desired mounting location with the template's center reference line at the center of the desired location.
NOTE:Use the center reference hole of the template as a guide to attach the template.
3
UC-SB1-CAM-FLEX
QuickStart
UC Video Conference Smart Soundbar & Camera
To Next Page
Loading...
Need help?
General
