Crestron UC-SB1 User Manual

3. Use a drywall saw to make a cutout in the wall for the soundbar cables.
NOTE: The cutout in the center of the template provides adequate access for all of the required cabling.
4. Install the four included anchors and screws into the drilled pilot holes.
5. Place the soundbar face down, and pivot the wall bracket away from the soundbar.
4
UC-SB1
QuickStart
UC Video Conference Smart Soundbar

Crestron UC-SB1 Specifications

General

Product type	Speaker
Certification	CE, IC, UL 62368‑1, CSA C22.2 62368‑1, EN 62368‑1, IEC 62368‑1, FCC Part 15 Class B, ICES‑003 Issue 5 Class B, EN55022:2010 Class B, AS/NZS CISPR22:2010 Class B, AS/NZS CISPR 22:2010 Class B, EN55024:2010, EN61000‑3‑2:2014, EN61000‑3‑3:2013, RoHS compliant
Product color	Black, Grey
Placement supported	Desk
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100‑240V V
AC input frequency	50 - 60 Hz
Heat dissipation	66 BTU/h
USB port	Yes
Bluetooth	No
HDMI ports quantity	-
Connectivity technology	Wired
Woofer diameter (subwoofer)	3 \
Woofer diameter	76 mm
Tweeter diameter	25 mm
Number of tweeter drivers	2
Soundbar speaker RMS power	- W
Woofer diameter (imperial)	2 \
Signal-to-Noise Ratio (SNR)	91 dB
Tweeter diameter (imperial)	1 \
RMS rated power	20 W
Audio output channels	- channels

Weight and Dimensions

Depth	100 mm
Width	1108 mm
Height	118 mm
Weight	6800 g