1. On the Bluetooth settings screen, tap next to the connected Bluetooth device
which you are configuring.
2. Tap FORGET to unpair it.
Data Usage
On the Home screen, swipe up the screen, tap to enter the Settings screen. Then,
choose Network & Internet > Data usage.
• Mobile data: Set your phone to use data connections on any cellular network
• Billing cycle: Set the monthly billing cycle date of each month.
You may enable Set data limit and enter a value to set the data usage limit under the
Data limit settings.
Note: If you turn on Wi-Fi and the data service simultaneously, the phone will
automatically use the Wi-Fi connection. If Wi-Fi is disconnected, the phone will use the
data service to continue the data connection. Please note that absence of Wi-Fi will
use your data which could cost you an amount of money according to your tariff with
your mobile operator.
To Next Page
