2.22
Pinto BT-POM 1212 - Revision 5
Pre-OperationPre-Operation Check - 3000 Litre
Do not have pesticides in the spraytank when
checking the sprayer.
WARNING
10 Turn spray booms ON and OFF to
check that they are operating.
11 Turn fenceline sprayer ON and OFF
to check that it is working correctly (if
fi tted).
12 While water is being pumped through
the boom, check for any leakages or
blockages throughout the sprayer.
Check all hoses,connections, valves,
fi lters, boom fi ttings etc. Check the
nozzles are operating correctly.
Rectify any problems.
13 With all boom sections operating,
check operating pressure and make
appropriate adjustment.
14 Switch booms ON and OFF several
times and check that the non-drip
diaphragms are working.
15 On completion of checking the
sprayer turn controls off by placing
the master switch and boom switches
in OFF position.
16 Disengage PTO after the Controller
master switch is turned OFF.
(10) Turn the boom switchs On & Off to check
operation.
(13) Check & adjust the pressure with boom sections
On.
Ensure the operating pressure, when the
boom nozzles are operating, does not exceed
recommended maximum for the nozzles you
are using.
NOTE
To Next Page
Loading...