4.8
Pinto BT-POM 1212 - Revision 5
Sprayer CalibrationCalibration Procedure
Step 10
Adjust Boom Height
Boom height should be adjusted to suit
the type of nozzle used, terrain and crop
or soil being sprayed.
Minimum boom height recommendations
depend on the nozzle spray angle and
nozzle spacing.
Refer to Nozzle chart recommendations.
Step 11
Record All Data For
Future Reference
Record all your calibration data on the work
sheets given at the end of this section.
Photocopy the work sheets to obtain the
number of work sheets required.
Boom height - courtesy of Teejet.
To Next Page
Loading...