EasyManua.ls Logo

Crown C48-2+2 - Wheels and Tires

Crown C48-2+2
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION AND SERVICE INFORMATION
16
Owners Manual and Service Guide
Lower the jack and test the stability of the vehicle on all four jack stands.
If only the front or rear of the vehicle is to be raised, place the chocks in front and behind each wheel not
being raised to stabilize the vehicle.
Lower the vehicle by reversing the lifting sequence.
Fig.6 Lifting the Vehicle
WHEELS AND TIRES
Tire Repair
Tool list Qty. Required
Lug wrench, 3/4”……… ……… 1
Impact socket, 3/4”, 1/2” drive …… 1
Impact wrench, 1/2” ……………… 1
Torque wrench, 1/2”drive………… 1
! WARNING ! A tire explosion can cause severe injury or death. Never exceed inflation pressure
rating on tire sidewall.
To reduce the possibility of tire explosion, pressurize tire with small amount of air applied
intermittently to seat beads. Due to the low volume of the small tires, overinflation can occur in seconds.
Never exceed the tire manufacturer’s recommendation when seating a bead. Protect face and eyes from
escaping air when removing valve core.

Table of Contents