Page 37
K-Series Balanced Current Amplifier™
after receiving copies of the shipping receipts. Shipments
should be sent “UPS ground.” (If the unit is under warranty,
you may send it C.O.D. for the cost of freight via UPS ground.)
The factory will return it via UPS ground. Please contact us if
other arrangements are required.
Factory Service Shipping Instructions:
1 When sending a Crown product to the factory for service,
be sure to fill out the service information form that follows
and enclose it inside your unit’s shipping pack. Do
not
send the service information form separately.
2 To ensure the safe transportation of your unit to the fac-
tory, ship it in an original factory packing container. If you
don’t have one, call or write Crown’s Parts Department.
With the exception of polyurethane or wooden crates, any
other packing material will not be sufficient to withstand
the stress of shipping. Do not use loose, small size
packing materials.
3 Do
not ship the unit in any kind of cabinet (wood or metal).
Ignoring this warning may result in extensive damage to
the unit and the cabinet. Accessories are not needed—
do not send cables and other hardware. Do not send this
instruction manual, if we forget what we said, we have
duplicates!
If you have any questions, please call or write the Crown Tech-
nical Support Group.
Always use the
original factory
packing to
transport
the unit.
Crown Audio Division
Technical Support / Factory Service
Plant 2 SW, 1718 W. Mishawaka Rd., Elkhart,
Indiana 46517 U.S.A.
Telephone:
219-294-8200
800-342-6939 (North America,
Puerto Rico, and Virgin Islands only)
Facsimile:
219-294-8301 (Technical Support)
219-294-8124 (Factory Service)
Fax Back:
219-293-9200 (North America only)
800-294-4094 (North America only)
219-294-8100 (International)
Internet:
http://www.crownaudio.com
To Next Page
Loading...
