Need help?Do you have a question about the Crown K2 and is the answer not in the manual?
General| Signal to Noise Ratio | > 100 dB |
|---|---|
| Total Harmonic Distortion | < 0.05% |
| Input Sensitivity | 1.4V |
| Channels | 2 |
| 8 Ohm Bridged | 1600W |
| 4 Ohm Bridged | 2500W |
| Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
| Power Output (4 Ohms) | 800W |
| Power Output (2 Ohms) | 1250W |
| Frequency Response | 20 Hz - 20 kHz |
| Cooling | Variable speed fan |
| Power Requirements | 50/60Hz |
| Dimensions | 19" x 3.5" x 12.5" (483mm x 89mm x 318mm) |
