To Next PageTo Next Page
Need help?Do you have a question about the Crown M Series and is the answer not in the manual?
General| Power Output | Varies by model |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | <0.05% |
| Weight | Varies by model |
| Channels | 2 |
| 4 Ohm Stereo (per channel) | Varies by model (e.g., M240: 240W, M400: 400W) |
| Input Impedance | 20 kOhms balanced, 10 kOhms unbalanced |
| Protection | Short circuit, thermal, and DC protection |
General safety warnings and important precautions for operating the amplifier.
Information regarding the amplifier's magnetic field and potential interference with sensitive equipment.
Statement regarding the device's compliance with FCC rules and regulations.
Lists the Electromagnetic Compatibility and Safety standards the product adheres to.
Highlights the key features and capabilities of the M Series amplifiers.
Provides guidance on how to effectively use the operation manual.
Instructions for unpacking and physically installing the amplifier.
Guidelines for maintaining adequate airflow and cooling for optimal performance.
Guidance on selecting and connecting input and output wires and connectors.
Specific instructions for wiring the amplifier in stereo mode.
Specific instructions for wiring the amplifier in bridge-mono mode.
Instructions for connecting the amplifier to the AC power source.
Step-by-step guide for the initial power-on sequence.
Essential precautions and critical warnings for safe amplifier operation.
Explanation of the controls and indicators found on the amplifier's front panel.
Explanation of the controls and connectors found on the amplifier's back panel.
Information on optional modules to enhance system versatility and signal routing.
Details on how to monitor amplifier fault status remotely via an RJ-11 jack.
Describes optional barrier block outputs as an alternative to binding posts.
How to use plugs to protect front panel level controls from adjustment.
Information on the optional 0.775-V input sensitivity setting.
Detailed explanation of the signal processing and amplification stages within the amplifier.
Guide to diagnosing and resolving common power, signal, clip, and fault conditions.
Detailed technical specifications for power, frequency response, and distortion.
Procedures for obtaining service outside the United States.
Information on service through authorized US centers or direct factory repair.
Instructions for safely shipping products for service, including packing requirements.
Overview of the warranty coverage, including what is and isn't covered.
Steps to follow to claim warranty service and necessary documentation.
