CS THERMOS BRAVA - Table of Contents

ENGLISH
1
You have just purchased a high quality product produced entirely in Italy.
Reading this manual is very important to guarantee correct functioning of the product in regards to
safety and servicing of the machine.
A correct installation and initial set up of set up parameters is vital and therefore it is reserved for
technicians authorized by the manufacturer as is periodic maintenance.
Cleaning is an important element for safety maintenance and for product functioning, and must be
carried out periodically to guarantee a long life and for keeping people and the machine safe.
This manual is relevant for all CS THERMOS air models.
INDEX
1 Safety warnings ............................................................................................................................ 2
2 Product description ................................................................................................................... 3
3 Pellet qality .................................................................................................................................... 3
4 Size data.......................................................................................................................................... 4
5 Technical data............................................................................................................................... 5
6 General rules for the realization of the flue........................................................................ 6
7 Execution of smoke discharge ................................................................................................. 7
8 Oxidising air intake..................................................................................................................... 8
9 Electrical connection ................................................................................................................ 9
10 Preliminary checks for the first start up ........................................................................... 10
11 Control panel display .................................................................................................................11
12 Operational phases ....................................................................................................................11
13 Programming .............................................................................................................................. 12
14 Alarm signalling ......................................................................................................................... 14
15 Replacing the ceramics............................................................................................................ 15
16 Care and maintenance ............................................................................................................. 15