CSO MS39 AS-OCT - Page 18

INSTRUCTIONS FOR USE
MS-39 AS-OCT| IFU302EN00 - 03/2019
This document is the property of
CSO Costruzione Strumenti Oftalmici srl.
Any reproduction, even partial, it is prohibited.
16/52
- tools for the follow-up control with differential maps with 2 or 3
elements
- tools for the follow-up control with comparison between 4
different maps
- a wide series of concise descriptors of the features of the cornea,
such as:
- Sim-K to simulate the measurement of an ophthalmoscope
with fixed targets (for the anterior surface)
- principal corneal meridians in the zones of 3 mm, 5 mm and
7 mm
- flatter and steeper hemi meridians in the zones of 3 mm, 5
mm and 7 mm
- peripheral degrees
- pupil decentralization, pupil diameter, and corneal diameter
size
- keratorefractive indices calculated in the pupil area for an
evaluation of the patient's visual quality
- keratoconus screening index for diagnosis and follow-up
- Dry Eye Report
For system requirements read paragraph "
Personal Computer” at
page 30.