CSO MS39 AS-OCT - 4 Device Use; How to Install the Device

MS-39 AS-OCT| IFU302EN00 - 03/2019
INSTRUCTIONS FOR USE
This document is the property of
CSO Costruzione Strumenti Oftalmici srl.
Any reproduction, even partial, it is prohibited.
33/52
4 DEVICE USE
4.1 HOW TO INSTALL THE DEVICE
CAUTION
Danger of device falling down. The table must be installed on a
horizontal and stable surface.
1
Place the ophthalmic table in the room. The table must be
lifted by two people.
2
If present, block the table wheels. Lower the lever of the brake.
3
Place the power supply under the support plane. Screw the
screws in the four holes.
Fig 11 - Table placement Fig 12 - Power supply unit placement