Chapter 4. Control Port Operation
64
November 2001
Selecting 2 will take the defined time slot mapping for the local unit
and send it to the remote ETU-01A unit. In this way, the bandwidth
can be controlled from the local unit.
<< Define Time Slot Mapping >>
1. Define Time Slot Mapping.
2. Send Time Slot to Far End.
Enter 1-2 or Press "ESC" to previous menu.
WAIT..........OK
The message "WAIT…" will be displayed while the data is being
transferred. "OK" will display following successful transfer.
Pressing ESC will take us back to the Define System Parameter
menu.
<< Define System Parameter >>
1. Timing
2. E1 Line
3. Time Slot
4. Data Port
5. Date & Time
6. Remote Config Time Slot Function.
7. SNMP Agent Setup
Enter 1-7 or Press "ESC" to previous menu.
To Next Page
Loading...
