Chapter 4. Control Port Operation
63
November 2001
<< Define Time Slot Mapping >>
TIME SLOT 01
TYPE : Data port
1. NC
2. Data Port
Enter 1-2 or Press "ENTER" to next Time Slot or
"ESC" to previous menu.
The slot number and map type are shown. Select 1 to remove the
timeslot from the data port, press 2 to assign the timeslot to the data
port. Press ENTER to move on to the next timeslot or ESC to exit
the mapping function.
If we press the ENTER key now, the second timeslot will be
displayed.
<< Define Time Slot Mapping >>
TIME SLOT 02
TYPE : Data port
1. NC
2. Data port
Enter 1-2 or Press "ENTER" to next Time Slot or
"ESC" to previous menu.
Continue to set the timeslot mapping assignments, go on to the next
timeslot or ESC. ESC will take us back to the Define Time Slot
Mapping menu.
To Next Page
Loading...
