Chapter 4. Control Port Operation
66
November 2001
<< Define Data Port Parameter >>
TYPE : RS530
MULTIPLIER : N64
CTS : ON
V.54 Mode : OFF
SPEED : 256Kbps
1. Multiplier
2. CTS
Enter 1-2 or Press "ESC" to previous menu.
Now we will select 2 to set the parameter for CTS.
<< Define Data Port CTS Parameter >>
1. ON
2. RTS
Enter 1-2 or Press "ESC" to previous menu.
Enter the appropriate setting for CTS (On always or follow RTS) or
press ESC to exit without changing. Press ESC again to exit to the
Define System Parameter.
<< Define System Parameter >>
1. Timing
2. E1 Line
3. Time Slot
4. Data Port
5. Date & Time
6. Remote Config Time Slot Function.
7. SNMP Agent Setup
Enter 1-7 or Press "ESC" to previous menu.
To Next Page
Loading...
