CTC Union ETU-01A - Page 73

Chapter 4. Control Port Operation
67
November 2001
The following is an example of setting the system date and time.
Press 5.
<< Define Date & Time >>
1. DATE
2. TIME
DATE : 2000/08/24 TIME : 16:24:25
Enter 1-2 or Press "ESC" to previous menu.
To define the Date, press 1. Enter the 4 digit year, followed by the 2
digit month (single digit months must have a leading zero) and
complete with the 2 digit day (single digit days must have a leading
zero).
<< Define Date >>
YEAR (1900 ~ 2099) : 2000
MONTH ( 01 ~ 12 ) : 08
DAY ( 01 ~ 31 ) : 24
The screen will revert to the Define Date & Time screen.
<< Define Date & Time >>
1. DATE
2. TIME
DATE : 2000/08/24 TIME : 16:26:10
Enter 1-2 or Press "ESC" to previous menu.
To define the time, press 2.