CTC Union ETU-01A - Page 74

Chapter 4. Control Port Operation
68
November 2001
<< Define Time >>
HOUR (00 ~ 23) : 16
MINUTE (00 ~ 59) : 27
SECOND (00 ~ 59) : 00
Enter the Hour, Minutes, and Seconds. (Single digit entries must
have a leading zero.)
<< Define Date & Time >>
1. DATE
2. TIME
DATE : 2000/08/24 TIME : 16:27:05
Enter 1-2 or Press "ESC" to previous menu.
To return to the Define System Parameter menu and start the clock,
press ESC.
<< Define System Parameter >>
1. Timing
2. E1 Line
3. Time Slot
4. Data Port
5. Date & Time
6. Remote Config Time Slot Function.
7. SNMP Agent Setup
Enter 1-7 or Press "ESC" to previous menu.
Press 6 to enter the remote configuration menu.