CTC Union ETU-01A - Page 80

Chapter 4. Control Port Operation
74
November 2001
********************************************
**** CTC UNION TECHNOLOGIES CO.,LTD ****
**** ETU-01A/SNMP TERMINAL MODE ****
**** SETUP MENU Ver. 1.16 ****
********************************************
1. Display System Status.
2. Define System Parameter.
3. Test Function Parameter.
4. Password
5. Reset Data to Default.
6. EXIT
DATE : 2000/08/24 TIME : 17:14:42
Enter 1-6 to select function.
Now we will move on to setting the Test Function parameters, press
3.
<< Define Test Mode Function >>
1. LoopBack Test
2. Bert Test
Enter 1-2 or Press "ESC" to previous menu.
First we will look at the item Loop Back Test, press 1.
<< Define LoopBack Test Port >>
E1 Line Loopback : LOOPBACK OFF
Data Port LoopBack : LOOPBACK OFF
1. E1 Line
2. Data Port
Enter 1-2 or Press "ESC" to previous menu.