Chapter 4. Control Port Operation
73
November 2001
<< SNMP Agent Setup Menu >>
1. Set the Agent Information.
2. Set Access Control Table.
3. Set Trap Receivers Table.
4. Set Community String. < Public >
5. Save Parameter to SNMP Card and Exit.
Enter 1-5 or Press "ESC" to previous menu.
Up until now, none of the changes made have been saved to the
SNMP card. Press 5 to save the settings. The display will show:
Wait...........Config SNMP Card.
Following completion, the screen will revert to the Define System
Parameters menu.
<< Define System Parameter >>
1. Timing
2. E1 Line
3. Time Slot
4. Data Port
5. Date & Time
6. Remote Config Time Slot Function.
7. SNMP Agent Setup
Enter 1-7 or Press "ESC" to previous menu.
Press ESC again to reach the top level menu.
To Next Page
Loading...
